JVC COMPACT GR-SXM735 - Manual (Page 42)

42
EN
ON Records in S-VHS on a VHS or S-VHS cassette (
੬
pg. 12).
OFF Records in VHS on a VHS or S-VHS cassette (
੬
pg. 12).
Allows you to set the tape length depending on the tape used (
੬
pg. 14).
FULL Make all of the indications appear on the LCD monitor/viewfinder
during playback or recording.
SIMPLE Make the following indications disappear from the LCD monitor/
viewfinder during recording or playback: cassette warning, tape
remaining time, battery pack remaining power indicator and tape length
indicator (
੬
pg. 62, 63)
Refer to “Picture Mode Setting” (
੬
pg. 16).
Displayed when “VIDEO” (the DSC Lamp is not lit,
੬
pg. 43) or “DSC”
(the DSC Lamp is lit,
੬
pg. 29) is selected.
Displayed when “DSC” (the DSC Lamp is lit,
੬
pg. 29) is selected.
Refer to “Animation” and “Time-Lapse” (
੬
pg. 48).
Refer to “Time-Lapse” (
੬
pg. 48).
Usually the distance to a subject where the lens is in focus depends on
the zoom magnification. Unless there is a distance of more than 1 m
(3.25 ft) to the subject, the lens is out of focus at the maximum telephoto
setting. When set to “ON”, you can shoot a subject as large as possible at
a distance of approx. 60 cm (23-5/8").
•Depending on the zoom position, the lens may go out of focus.
Allows you to select the language (ENGLISH, FRENCH, SPANISH or PORTUGUESE)
of Instant Titles (
੬
pg. 47).
Allows you to set the current date and time (
੬
pg. 11).
ON Demonstrates certain functions automatically. When “DEMO MODE” is
set to “ON” and the Menu Screen is closed, the demonstration starts.
Operating the Power Zoom Lever during the demonstration stops the
demonstration temporarily. If the Power Zoom Lever is not moved for
more than 1 minute after that, the demonstration will resume.
NOTE:
When a tape whose Erase Protection tab is in the position that allows
recording is loaded in the camcorder, demonstration is not available.
OFF Automatic demonstration will not take place.
ADVANCED FEATURES (cont.)
SYSTEM MENU (cont.)
TAPE LENGTH *
REC TIME *
DEMO MODE *
INT. TIME
TITLE LANG. *
S-VHS ***
(S-VHS ET *** )
DATE/TIME
TELE MACRO OFF
ON
DISPLAY
PICTURE **
SNAPSHOT FULL
PIN-UP
MULTI-4
MULTI-9
* Activated only when “VIDEO” is selected (the DSC Lamp is not lit). If “DSC” is selected (the DSC Lamp is lit), this
function will not be activated even though the highlight bar on the Menu Screen will move to that position.
** Activated only when “DSC” is selected (the DSC Lamp is lit). If “VIDEO” is selected (the DSC Lamp is not lit), this
function will not be activated even though the highlight bar on the Menu Screen will move to that position.
Functions listed without */** are available when either “DSC” or “VIDEO” is selected.
*** S-VHS ET is displayed when a VHS cassette is loaded, and S-VHS is displayed when an S-VHS cassette is loaded
(
੬
pg. 12). If a cassette is not loaded, “S-VHS” will be displayed in the Menu Screen.
S-VHS ET is preset to “OFF”.
: Factory-preset