JVC 1203TNH-II-IM - Manual (Page 11)

These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away.
If you have questions, or for more detailed information on any of these steps, please consult
other sections of this manual.
Quick Setup Getting Started
Getting Started
11
This TV comes with a Table Top Stand already attached.
This stand can be used to adjust the direction of the TV screen 5 º up, 10 º down and 20 º to the
left or right.
Step 1 - Using the stand
Tilt the TV up or down
While holding the bottom of the stand with one hand,
use your other hand to hold the middle of the top of the
TV, and slowly tilt the TV up or down.
• As a safety measure, the stand is constructed so that
it requires a certain amount of force to tilt the TV.
Cable Holder
A cable holder which keeps your connection
cables tidy is attached on the back of the
stand. Gently squeeze the left and right of
the cable holder, and pull it to remove it from
the stand. After putting the cables in the
cable holder, attach it to the back of the stand
again.
Rotate the TV left or right
While holding the bottom of the stand with one hand,
use your other hand to hold the edge of the panel
and slowly adjust the direction of the TV stand.
POWER
cable holder
POWER
LT-26WX84 Eng (with stand) 11 12/11/03, 10:00:49 AM