JVC 1203TNH-II-IM - Manual (Page 16)

Quick Setup Connections
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on
the back of the TV, OR connect an S-Video cable from the camcorder to the back of the TV.
2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on
the back of the TV.
3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on
the back of the TV.
Note:
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the
LEFT AUDIO IN on the back of the TV.
You can connect a camcorder to you televison by using the input jacks located on the back of
the television.
CAMCORDER
OR
VIDEO
INPUT 1
AUDIO
S-VIDEO
OVER
VIDEO
VIDEO
INPUT 2
L
R
AUDIO
S-VIDEO
OVER
VIDEO
VIDEO
MONITOR OUT
L
R
AUDIO
S-VIDEO
VIDEO
75
(UHF/VHF)
AUDIO
VIDEO
TV Rear Panel
16
Connecting to a Camcorder
Headphone Connection
You can connect a pair of headphones to the television using the headphone jack located on
the side of the television.
1) Plug a headphone jack into the headphone jack on the television’s side panel.
LT-26WX84 Eng (with stand) 16 12/11/03, 10:00:53 AM