JVC 1203TNH-II-IM - Manual (Page 17)

17
Quick Setup Connections
TV Rear Panel
Speaker Speaker
Amplifier
VIDEO
INPUT 1
AUDIO
S-VIDEO
OVER
VIDEO
VIDEO
INPUT 2
L
R
AUDIO
S-VIDEO
OVER
VIDEO
VIDEO
MONITOR OUT
L
R
AUDIO
S-VIDEO
VIDEO
75
(UHF/VHF
)
AUDIO
VIDEO
1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the
LEFT AUDIO INPUT on the amplifier.
2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the
RIGHT AUDIO INPUT on the amplifier.
Notes:
• Refer to your amplifier’s manual for more information.
• You can use AUDIO OUTPUT for your home theater system.
Connecting to an External Amplifier
For the VIDEO OUTPUT and S-VIDEO OUTPUT
• No signal will output through the S-VIDEO OUTPUT when you are not viewing images coming
from the S-VIDEO INPUT. In this case, use the VIDEO OUTPUT instead of the S-VIDEO
OUTPUT.
• No signal will output through the VIDEO OUTPUT or S-VIDEO OUTPUT when you are viewing
images coming from the VIDEO-1/COMPONENT VIDEO.
LT-26WX84 Eng (with stand) 17 12/11/03, 10:00:54 AM