Listening to external equipments, 13 engli s h, Set the volume control to minimum – JVC FS-8000 User Manual
Page 16: Press the md/tape button, Start playing the external equipment, Apply sound effects, if you wish, Set the volume to minimum position, Press the aux button, Start playing the auxiliary equipment
13
Engli
s
h
■
■
Listening to External Equipments
PRESET
TUNING
BASS
CONTROL
AUX
POWER
MD/TAPE
0 dB
VOLUME GAIN SELECTOR
TUNER
BAND
OPEN/CLOSE
TIMER/
SNOOZE
CLOCK
UP
MULTI CONTROL
DOWN
U
L
T
R
A
C
O
M
PA
CT COMPO
NE
N
T
S
Y
S
T
E
M
FS-8000
-6dB
-12dB
CD
SUBWOOFER
LEVEL
VOLUME
CD
TUNER
BAND
MD
/TAPE
DOWN
SET
UP
TREBLE
CANCEL
BASS
RANDOM
REPEAT
PROGRAM
AUTO
PRESET
VOLUME
GAIN SELECT
CD
FM MODE
AUX
DISPLAY
SLEEP
POWER
DIMMER
REMOTE CONTROL RM-RXFS8000
AUX
MD/TAPE
AUX
MD/TAPE
You can play an external MD recorder, tape deck, etc. through the
system.
■
First make sure that the external equipment is properly connect-
ed to the System. (See page 4.)
■
1. Set the VOLUME control to minimum.
■
2. Press the MD/TAPE button.
When the System is in Standby mode, the System is automati-
cally turned on.
“MD/TAPE” appears on the display.
■
3. Start playing the external equipment.
■
4. Adjust the VOLUME control to the desired
listening level.
■
5. Apply sound effects, if you wish.
■
Press the BASS CONTROL button to reinforce the bass sound.
■
Press the BASS/TREBLE button to control the tone. (See “Tone
Control” on page 7.)
To exit MD/TAPE mode
You will automatically switch out of MD/TAPE mode when you se-
lect another source.
Note:
You can also record the System’s output signal to the exter-
nal equipment. For operation, refer to the equipment’s own
instructions.
You can listen to a turntable or other auxiliary equipment.
■
First make sure that the external equipment is properly connect-
ed to the System. (See page 5.)
■
1. Set the VOLUME to minimum position.
■
2. Press the AUX button.
When the System is in Standby mode, the System is automati-
cally turned on.
“AUX” appears on the display.
■
3. Start playing the auxiliary equipment.
■
4. Adjust the VOLUME control to the desired
listening level.
■
5. Apply sound effects, if you wish.
■
Press the BASS CONTROL button to reinforce the bass sound.
■
Press the BASS/TREBLE button to control the tone. (See “Tone
Control” on page 7.)
To exit AUX mode
You will automatically switch out of AUX mode when you select
other source.
Note:
For operation of the auxiliary equipment, refer to its own In-
structions.
Listening to an External MD
Recorder/Tape Deck
Listening to Auxiliary Equip-
ment