JVC FS-8000 - Manual (Page 17)

14
Engli
s
h
■ ■
Using the Timers
PRESET
TUNING BASS CONTROL
AUX
POWER
MD/TAPE
0 dB
VOLUME GAIN SELECTOR
TUNER BAND
OPEN/CLOSE
TIMER/ SNOOZE CLOCK UP MULTI CONTROL DOWN
U L T R A C O M PA CT COMPO NE N T S Y S T E M
FS-8000
-6dB -12dB
CD
SUBWOOFER
LEVEL
VOLUME
CD TUNER
BAND
MD
/TAPE
DOWN
SET
UP
TREBLE CANCEL BASS
RANDOM REPEAT PROGRAM
AUTO
PRESET
VOLUME
GAIN SELECT
CD
FM MODE AUX DISPLAY
SLEEP POWER DIMMER
REMOTE CONTROL RM-RXFS8000
Timer indicator
SLEEP
4
¢
CLOCK
TIMER/
SNOOZE
SLEEP indicator
SNZ indicator
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
The timers let you control listening functions automatically.
You can set the clock whether the System is on or off.
Notes:
• The clock must be correctly set for the timers to work.
• The procedure must be completed within two minutes. Otherwise,
the setting is cleared and must be repeated from the beginning.
■
1. Press the CLOCK button on the Unit for
more than two seconds.
The clock rapidly blinks.
■
2. Press the 4 or ¢ button on the Unit to set
the time.
Pressing the ¢ button moves the time forwards and pressing
the 4 button moves it backwards. Hold down the button to
move the time in 10-minute intervals.
■
3. Press the CLOCK button.
The selected time is set and the seconds start counting from 0.
•
Each time the hour’s digits change from 11 to 12, the dis-
play alternates between AM and PM. (12 midnight is indi-
cated as “AM 12:00” and 12 noon is indicated as “PM
12:00”.)
CAUTION: If there is a power failure, the clock
loses its setting after about 20 minutes. The dis-
play shows “AM 12:00” and blinks, and the clock
must be reset.
Note: The clock may gain or lose one to two minutes per month.
You can set the Timer whether the System is on or off.
Once you have set the Daily Timer, the timer will be activated at the
same time every day. It can be cancelled and re-activated whenever
you wish.
The Timer indicator on the display shows when the Daily Timer you
have set is in effect.
Note: Perform each setting within 30 seconds. Otherwise, the set-
ting is cleared and the procedure must be repeated from the
beginning.
■
1. Press the POWER button to turn on the Sys-
tem.
■
2. Setting the ON time (Example: PM 12:15).
1. Press the TIMER/SNOOZE button on the Unit.
The Timer indicator lights up and the current ON time
blinks on the display.
2. Press the ¢ or 4 button on the Unit to set the time you
want the Unit to come on.
Pressing the
¢ button moves the time forwards and press-
ing the 4 button moves the time backwards. Hold down
the button to move the time in 10-minute intervals.
Setting the Clock
UP MULTI CONTROL DOWN
(for 2 seconds)
Setting the Daily Timer
(After 2 seconds)