Connecting the fm antenna, Connecting the am antenna, 3engli s h – JVC FS-8000 User Manual

Page 6

Advertising
background image

3

Engli

s

h

CAUTION: Make all connections before plugging the System into an AC power outlet.

Rear Panel of the Unit

Using the Supplied Wire Antenna

Using the Coaxial Type Connector (Not Supplied)

A 75-ohm antenna with coaxial type connector should be connected
to the FM 75-ohm COAXIAL terminal.

If reception is poor, connect the outside antenna.

Note:

Before attaching a 75 ohm coaxial lead (the kind with a
round wire going to an outside antenna), disconnect the sup-
plied FM Wire Antenna.

CAUTION: To avoid noise, keep antennas away
from the System, the connecting cord and the AC
power cord.

Rear Panel of the Unit

Connecting the FM Antenna

AC IN

R

L

FM wire antenna (supplied)

Coaxial cable

FM outdoor antenna

(option)

Connecting the AM Antenna

AC IN

R

L

Attach the AM loop to its base by snapping the tabs on the
loop into the slot in the base.

AM loop antenna (Supplied)

AM EXT

AM LOOP

Turn the loop until you have the best reception.

Advertising