Jura Capresso 65349R3 - Manual (Page 28)

Recommendations: If you use the machine only in the morning,
leave the auto-off as is.
If you use the machine all day long set the auto-off between 3 and
5 hours. This way the machine is always ready and you don’t
have to turn it on and wait for it to warm up again.
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER .
• Turn the dial until the display shows: OFF AFTER
a. Push the Rotary Dial. The display shows OFF AFTER 2 HRS
b. Turn the Rotary Dial until the desired setting appears in the
display, e.g. 5 HRS .
c. Push the Rotary Dial to confirm. Display shows CONFIRMED ✔
and shows OFF AFTER 5 HRS .
d. Turn the Rotary Dial until the display shows EXIT and push
the Rotary Dial.
COFFEE READY
26.10 INFORMATION
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER .
• Turn the dial until the display shows: INFORMATION .
a. Push the Rotary Dial 1 ESPRESSO 15 COUNT (example). It
shows how often coffee was prepared with this button.
b. Turning the Rotary Dial slowly clockwise, the display will show
the following additional information:
• How many cups made with the other buttons: 2 Espresso, 1
Coffee, 2 Coffee, Cappuccino, Special Cup, Milk, Hot Water,
Pre-ground.
• Then it will show the pre-sets for these buttons (volumes in oz.
and milk in seconds)
• Finally it will show how often the programs for decalcifying,
cleaning and filter change were used.
c. Push the Rotary Dial to return to INFORMATION .
d. Turn the Rotary Dial until the display shows EXIT and push
the Rotary Dial.
COFFEE READY
26.11 RENAMING
This nifty feature lets you rename all eight beverage buttons, the
welcome message and the end message. The original pre-sets
are stored in the Z5 and you can always restore them.
Let’s change the 1 ESPRESSO name to
CUP OF JOE .
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows FILTER .
• Turn the dial until the display shows: RENAME
a. Push the Rotary Dial. RENAME PRODUCT NAME . If you turn
the dial you can select from PRODUCT NAME , WELCOME
MESSAGE , END MESSAGE , EXIT .
b. Select PRODUCT NAME and push the dial. PRODUCT
NAME CHANGE . If you turn the dial you can select from
CHANGE , RESET , RESET ALL . Select CHANGE and push
the dial. SELECT PRODUCT .
c. Push the 1-cup Espresso Button. The alphabet will show in
the display. Turn the dial to " C " and push the dial, then select
the letter " U " and push the dial and so on.
Please note: The "blank" space is located after the letter " Ü ".
d. When you are finished with the new name select the ✔ symbol
28.