JVC XL-PG59SL - Manual (Page 18)

9
XL-PG59SL / LVT0979-005A / [E]
Preventing Accidental
Operation
(Hold Mode)
This function causes the unit to ignore accidental button
presses.
Hold mode prevents the following:
• Powering on the unit accidentally (which can cause the
batteries to go dead).
• Play being cut off unexpectedly.
The HOLD switch on the unit sets the unit in Hold mode.
The HOLD switch on the remote control sets the remote
control in Hold mode.
To use the Hold mode
• To prevent the unit from powering up accidentally, set
the HOLD switch to the ON position.
• To prevent the unit from unexpected operation during
play, set the HOLD switch to the ON position after you
starts playing the disc.
“ ”
Power on : “ ” stays lit when the remote control is
set in Hold mode.
Power off : “ ” lights up for a few seconds when 6
is pressed in Hold mode.
To release the function
Set the HOLD switch to the OFF position.
Note:
When the HOLD switch on the unit is set to the ON po-
sition, you cannot turn on the unit with the
6 on the
unit. On the other hand, when the HOLD switch on the
remote control is set to the ON position, you cannot turn
on the unit with the
6 on the remote control.
OFF ON
HOLD
(OFF) (ON)
XL-PG59(en,sp,du)p01-18.p65 5/16/03, 1:28 PM 9