Setting the house security code setting – GE 19200 GE Portable Wireless Seven-Sound Chime User Manual
Page 3
and 9=off.)
3. Select the desired chime sound from the table below.
Chime Sound Table
Position
7
8
9
Westminster
ON
OFF
OFF
Ding
Dong
OFF
ON
OFF
Knock
OFF
OFF
ON
Bronze Chime ON
ON
OFF
Cuckoo Clock ON
OFF
ON
Foghorn
OFF
ON
ON
Gong
ON
ON
ON
ON: Add a jumper to a location
OFF: Remove jumper from a location.
4. Remove or add the jumpers to match the table.
5. Store unused jumpers as shown.
Parking the jumper on an open set of pins. The two jumpers on the left are in the
parked position.
Setting The House Security Code Setting
The House Security Code is pre-set at the factory and no further adjustment is
normally required. However, if you experience erratic or no operation from your
chime you may want to reset the House Security Code Setting.