Jwin ILuv i903 - Manual (Page 19)

Noise-Canceling Headset w/ Bluetooth wireless technology V10M10_IM_EN_12072006
www.i-Luv.com - 18 -
Multi-function
button
OPERATING INSTRUCTIONS
Listening to Music
In order to listen to music on the i903, it must be paired with a device equipped with
Bluetooth wireless technology. To pair with such a device, follow the instructions below:
1. Turn off the Bluetooth wireless communication if it is currently turned on by pressing
the Multi-function button for approximately five (5) seconds.
2. With the Bluetooth wireless communication off, hold the Multi-function button for
approximately five (5) seconds until the red and blue lights blink alternately around the
button. The headset is now ready for pairing.
3. Set your device with Bluetooth wireless technology to its pairing mode (see owner’s
manual of the device for these instructions). The model number of this headset is i903.
If the device requires a model number entry, please enter “i903.” The password for
the headset is “0000.
4. Please enter this password if required by the device. If the headset if correctly
paired, the blue light will blink.
5. In order to make and receive calls on your mobile phone with Bluetooth wireless
technology while listening to music on the i903, be certain to pair the phone BEFORE
pairing an audio device or the audio adapter.
Music Playing Functions
1. Volume+/Next : Press and hold this button (>>) for three(3) seconds to skip to the
next song.
2. Volume-/Previous: Press and hold this button (<<) for three(3) seconds to return to
the previous song
3. Play/Pause control: Press the Play/Pause button to play or pause music.
4. Multi-function/STOP button: Press once to stop, press one more time to Play.
Note: Play/Pause Button and Multi-Function Button will act as play button when player is
in Stop Mode or Pause mode.

• Active-Noise Reduction remains activated when the headphones are powered on.
2
1
3
4