JVC GM X50U - Manual (Page 21)

20
Video Adjustments
(Continued)
Setting the Receivable Signal Types
You can set the receivable signal types. Normally, select
“AUTO.”
A common setting will apply to both the VIDEO A input and
the VIDEO B input, and a different setting will apply to the
COMPONENT input.
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press 5/∞ to move the cursor (3) to
“FUNCTION SELECT.”
3
Press 3 to display the Function
Selection Menu.
* 1
“ASPECT” does not appear when 720/60p, 720/50p,
1080/60i (1035/60i), or 1080/50i signal is being input
through the COMPONENT/RGB B input terminals.
* 2 “SIGNAL MODE” appears only when VIDEO
A, VIDEO B, or COMPONENT input is selected.
* 3 “SYNC TERM.” appears only when the RGB B
input is selected.
4
Press 5/∞ to move the cursor (3) to
“SIGNAL MODE.”
5
Press 2/3 to select the receivable video
signal type.
Each time you press the button, the receivable video
signal type changes as follows:
• When VIDEO A or VIDEO B input is selected:
• When COMPONENT input is selected:
* Changes according to the “HD SIGNAL MODE”
setting (see page 24).
6
Press MENU/EXIT (or MENU on the
Monitor) twice to exit the menu
operations.
P I C T U R E A D J .
S I Z E / P O S I T I O N A D J .
F U N C T I O N S E L E C T
S T A T U S D I S P L A Y
E N T E R :
M A I N M E N U
S E L E C T : E X I T : M E N U
Cursor ( 3)
AUTO NTSC
PAL N PAL M
C O L O R T E M P .
A S P E C T
S I G N A L M O D E
C O M P O . / R G B B
S Y N C T E R M .
r e s e t
F U N C T I O N S E L E C T
A D J U S T : S E L E C T : E X I T : M E N U
: H I G H
: P A N O R A M I C
: A U T O
: R G B B
: H I G H *
*1 *2 *3
AUTO 480i 480p 576i 576p
720/60p 1080/60i
(1035i)* 720/50p 1080/50i
Setting the COMPONENT/RGB B Input
After connecting the playback device such as a PC or a DVD
player to the COMPONENT/RGB B terminals, you have to
specify which type of signal comes into this terminal—RGB or
component signals.
• Without setting “COMPO./RGB B” correctly, you cannot
show any picture though you select the COMPONENT or
RGB B input.
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press 5/∞ to move the cursor (3) to
“FUNCTION SELECT.”
3
Press 3 to display the Function
Selection Menu.
* 1 “ASPECT” does not appear when 720/60p, 720/50p,
1080/60i (1035/60i), or 1080/50i signal is being input
through the COMPONENT/RGB B input terminals.
* 2
“SIGNAL MODE” appears only when VIDEO
A, VIDEO B, or COMPONENT input is selected.
* 3 “SYNC TERM.” appears only when the RGB B
input is selected.
4
Press 5/∞ to move the cursor (3) to
“COMPO./RGB B”
5
Press 2/3 to select the type of signal.
COMPO. : When connecting the playback device such as
a DVD player, which can emit the component
signals.
RGB B : When connecting the playback device such as
a PC, which can emit the RGB signals.
The setting changes and the “FUNCTION SELECT”
Menu disappears.
P I C T U R E A D J .
S I Z E / P O S I T I O N A D J .
F U N C T I O N S E L E C T
S T A T U S D I S P L A Y
E N T E R :
M A I N M E N U
S E L E C T : E X I T : M E N U
Cursor ( 3)
C O L O R T E M P .
A S P E C T
S I G N A L M O D E
C O M P O . / R G B B
S Y N C T E R M .
r e s e t
F U N C T I O N S E L E C T
A D J U S T : S E L E C T : E X I T : M E N U
: H I G H
: P A N O R A M I C
: A U T O
: R G B B
: H I G H *
*1 *2 *3
14-21_GM_X50[US].p65 04.1.27, 8:38 AM 20