JVC GM X50U - Manual (Page 36)

35
STATUS DISPLAY: See page 23.
Sets if you want the input terminal and the type of signal to be indicated on the screen just after inputs are switched.
CONTROL LOCK: See page 23.
Sets the Monitor so that it cannot be operated with the buttons on itself.
REMOTE SWITCH: See page 24.
Set the selectable input terminals when controlling the Monitor with the external control unit.
HD SIGNAL MODE: See page 24.
Select the High-Definition (HD) signal type.
FAN SPEED: See page 25.
Sets the speed of the internal cooling fan.
WHITE BALANCE: See page 25.
Adjusts R GAIN, G GAIN and B GAIN finely each for “HIGH” and “LOW” settings of the color temperature.
TIMER: See pages 26 and 27.
Sets the clock and the Power On/Off Timer.
PIXEL SHIFT: See page 28.
Sets a screen saver.
POWER SAVE: See page 28.
Sets the power save function.
COLOR-REVERSE: See page 28.
Use to reduce the afterimage on the screen of the still picture by reversing the color.
REFRESH: See page 29.
Use to reduce the whitish image remaining on the screen after turning off the power.
reset: See page 30.
Resets the Setup Menu settings to defaults.
all reset: See page 31.
Resets the all menu settings and adjustments to defaults.
HOUR METER x 100h: See page 31.
Use to confirm the hours of use.
MODEL: See page 31.
Use to confirm the model information of the Monitor.
32-41_GM_X50[US].p65 04.1.27, 8:38 AM 35