JVC KD-G720 - Manual (Page 44)

14
ENGLISH
Indication, [Range]
BAS* 1 (bass), [–06 to +06]
Adjust the bass.
TRE* 1 (treble), [–06 to +06]
Adjust the treble.
FAD* 2 (fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL* 3 (balance), [L06 to R06]
Adjust the left and right speaker balance.
LOUD* 1 (loudness), [LOUD ON or
LOUD OFF]
Boost low and high frequencies to produce a
well-balanced sound at low volume level.
SUB. W* 4 (subwoofer), [00 to 08]
Adjust the subwoofer output level.
VOL (volume), [00 to 30 or 50* 5 ]
Adjust the volume.
* 1 When you adjust the bass, treble, or loudness,
the adjustment you have made is stored for
the currently selected sound mode (C-EQ)
including “USER.”
* 2 If you are using a two-speaker system, set the
fader level to “00.”
* 3 This adjustment cannot affect the subwoofer
output.
* 4 This takes effect only when a subwoofer is
connected.
* 5 Depending on the amplifier gain control
setting. (See page 16 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode)
items (except “SID”) listed in the table that
follows.
1
2
Select a PSM item.
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5
Finish the procedure.
Ex.: When you select “DIMMER”
EN08-17_KD-AR770[J]2.indd 14 EN08-17_KD-AR770[J]2.indd 14 11/15/05 7:43:12 PM 11/15/05 7:43:12 PM