JVC KD-G720 - Manual (Page 73)

7
ENGLISH
To tune in to a station manually
In step ! on the left...
1
2 Select a desired station frequency.
When an FM stereo broadcast is hard to
receive
Lights up when monaural mode is activated.
Reception improves, but stereo effect will be
lost.
To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO
indicator goes off.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1
Select the FM band (FM1 – FM3) you
want to store into.
2
3
Finish the procedure.
To check the current clock
time while the power is
turned off
To check other information
while listening to the radio
Clock = Station name*
=Frequency =(back to the
beginning)
* FM/AM: If no name is assigned to a station,
“NO NAME” appears. To assign a title to a
station, see page 15.
Radio operations
~
Ÿ
Lights up when receiving an FM stereo broadcast with
sufficient signal strength.
Selected band appears.
!
Start searching for a station.
When a station is received, searching
stops.
To stop searching, press the same button
again.
EN06-11KD-G725[UN]5.indd 7 EN06-11KD-G725[UN]5.indd 7 12/6/05 5:45:45 PM 12/6/05 5:45:45 PM