JVC KD-G720 - Manual (Page 45)

15
ENGLISH
Indications Selectable settings, [reference page]
DEMO
Display demonstration
DEMO ON : [Initial]; Display demonstration will be activated
automatically if no operation is done for about
20 seconds, [8].
DEMO OFF : Cancels.
CLOCK H
Hour adjustment
1 – 12, [8]
[Initial: 1 (1:00)]
CLOCK M
Minute adjustment
00 – 59, [8]
[Initial: 00 (1:00)]
CLK ADJ* 1
Clock adjustment
AUTO : [Initial]; The built-in clock is automatically adjusted
using the clock data provided via the satellite radio
channel.
OFF : Cancels.
T-ZONE* 1 , * 2
Time zone
Select your residential area from one of the following time zones for
clock adjustment.
EASTERN [Initial]
“ ATLANTIC “ NEWFOUND “ ALASKA “
PACIFIC
“ MOUNTAIN “ CENTRAL “ (back to the beginning)
DST* 1 , * 2
Daylight savings time
Activate this if your residential area is subject to DST.
ON
: [Initial]; Activates daylight savings time.
OFF : Cancels.
SID* 3
SIRIUS ID
The 12-digit SIRIUS identification number scrolls on the display
5 seconds after “SID” is selected, [18].
• Press SEL to resume the previous display.
LEVEL
Audio level meter
ON : [Initial]; Activates the audio level indicator.
OFF : Cancels; sound mode indicator is shown.
DIMMER
Dimmer
AUTO : [Initial]; Dims the display when you turn on the
headlights.
ON : Activates dimmer.
OFF : Cancels.
TEL* 4
Telephone muting
MUTING 1/MUTING 2 : Select either one which mutes the sounds
while using a cellular phone.
OFF : [Initial]; Cancels.
• If CD, CD changer, or USB memory has been selected as the source,
playback pauses during telephone muting.
SCROLL* 5
Scroll
ONCE : [Initial]; Scrolls the track information once.
AUTO : Repeats scrolling (5-second intervals in between).
OFF : Cancels.
• Pressing DISP for more than one second can scroll the display
regardless of the setting.
* 1 Displayed only when SIRIUS Satellite radio or XM Satellite radio is connected.
* 2 Displayed only when “CLK ADJ” is set to “AUTO.”
* 3 Displayed only when SIRIUS Satellite radio is connected.
* 4 Only for KD-AR770.
* 5 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
Continued on the next page
EN08-17_KD-AR770[J]3.indd 15 EN08-17_KD-AR770[J]3.indd 15 11/23/05 9:28:03 AM 11/23/05 9:28:03 AM