JVC UX-G60 - Manual (Page 16)

14
Changing the Display Brightness
You can dim the display window.
* 1 “AUTO DIM” does not work for CD/MP3/WMA* 2 .
Changing the Scanning Mode
Select the color system and the video signal mode according
to the type of your TV. If you connect a progressive TV to
UX-G60 through the COMPONENT jacks, you can enjoy a
high quality picture from the built-in DVD player by
selecting “PAL PRG” or “NTSC PRG.”
Changing the Picture Tone
• While showing a playback picture on the TV, you can
select a preset picture tone, or adjust it and store your own
taste.
To select a preset picture tone
1 While playing, display VFP setting screen.
2
Select a preset picture tone.
To remove the screen, press VFP again while holding
SHIFT.
To adjust the picture tone
1 Select “USER1” or “USER2.”
• Follow steps 1 and 2 explained above.
2 Select a parameter you want to adjust.
DIM ON Dims the display.
AUTO DIM * 1 Removes the display illumination when
starting playback a disc with a video
source.
• The display illuminates when playback
stops.
PAL Select for a conventional PAL TV.
PAL PRG * 2 Select for a progressive PAL TV.
Select to enjoy a progressive scanned
picture with a progressive PAL TV.
NTSC Select for a conventional NTSC TV.
NTSC PRG * 2 Select for a progressive NTSC TV.
Select to enjoy a progressive scanned
picture with a progressive NTSC TV.
Remote
ONLY
1
DIMMER
DIM ON
AUTO DIM
DIM OFF
(while holding...)
(Canceled)
Remote
ONLY
INFO
SCAN MODE
9
PAL PRG PAL
NTSC PRG NTSC
ENTER/SET
NTSC/PAL
9
PAL
NTSC
ENTER/SET
(while holding...)
UX-G60
UX-G55
(while holding...)
NORMAL Normally select this.
CINEMA Suitable for a movie source.
USER1/USER2 You can adjust parameters and can
store the settings.
GAMMA Adjust if the neutral color is bright or
dark (–3 to +3).
BRIGHTNESS Adjust if the entire picture is bright or
dark (–8 to +8).
CONTRAST Adjust if the far and near positions
are unnatural (–7 to +7).
SATURATION Adjust if the picture is whitish or
blackish (–7 to +7).
TINT Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS Adjust if the picture is indistinct
(–8 to +8).
Remote
ONLY
VFP
10
0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
0
(while holding...)
On the TV
NORMAL CINEMA
USER2 USER1
ENTER/SET
TV CH
TV CH
* 2 For UX-G60 only
UX-G60[U]_2.book Page 14 Tuesday, February 7, 2006 5:16 PM