JVC UX-G60 - Manual (Page 40)

38
– This System can playback DivX files with the extension
code <.divx> <.div> <.avi> (regardless of the letter
case—upper/lower).
– The System does not support GMC (Global Motion
Compression).
– The file encoded in the interlaced scanning mode may
not be played back correctly.
– You cannot use the following functions—One Touch
Replay, Slow motion, A-B Repeat, Program Play,
Random Play and on-screen operations.
Playing Back a Disc/File for UX-G60:
• Some DVD Audio discs prohibit downmix. When you
playback such a disc, “LR ONLY” appears on the display
and the System plays back the left front and right front
signals.
• When playing back a DVD Audio disc recorded in MLP
(Meridian Lossless Packing; a lossless audio compression
system that can completely recreate the PCM signal), the
signals are recognized as the linear PCM signals, however,
no indicator lights up on the display.
• While the System is reading a disc, changing the source to
USB MEMORY may cause the System to continue
playback the DVD/CD source. In this case, press
7 on the
main unit to reactivate the USB source.
• The following functions cannot be used for the files in the
USB mass storage class device:
– Selecting the View Angle (page 17)
– Special Effect Playback (page 18)
– Program Play (page 19)
– A-B Repeat (page 21)
– Time Search (page 24)
• For playback of files in the USB mass storage class
device...
– When connecting a USB mass storage class device, refer
also to its manual.
– Connect one USB mass storage class device to the
System at a time. Do not use a USB hub.
– You cannot charge any USB device through the USB
MEMORY jack of this System.
– While playing back a file in a USB mass storage class
device, do not disconnect the device. It may cause a
malfunction of both the System and the device.
– JVC bears no responsibility for any loss of data in the
USB mass storage class device while using this System.
– When connecting with a USB cable, use the cable whose
length is less than 1 m.
– This System is compatible with the USB Full-Speed (not
compatible with the USB 1.1).
– You can playback the following types of files in a USB
mass storage class device (maximum data transfer rate:
2 Mbps):
– Music: MP3, WMA
– Picture: JPEG
– Movie: MPEG-1, MPEG-2, ASF, DivX (maximum
frame rate of 30 fps for progressive)
– You cannot playback a file larger than 2 Gigabyte.
– When playing a file which has a large transfer rate,
frames or sounds may be dropped during playback.
– This System cannot recognize a USB mass storage class
device whose rating is other than 5 V and does not exceed
500 mA.
– This System may not playback some USB mass storage
class devices and does not support DRM (Digital Rights
Management).
– This System may not playback some files even though
their formats are listed above.
• For ASF playback...
– This System can playback ASF files with the extension
code <.asf> (regardless of the letter case—upper/lower).
– This System supports ASF files whose resolution is 352
x 288 pixels or less.
– Some recorded files may not be able to playback
depending on file characteristics, kind of digital camera/
video camera, or recording conditions.
– You cannot use the following functions—One Touch
Replay, Slow motion, A-B Repeat, Program Play and
Random Play.
Playing Back a Portable Audio Device:
• When QP Link fails due to a weak sound signal from the
AUX jack, Auto Standby may turn the System off even if
you can hear the sound from the speakers.
In such cases, adjust the volume level of the component
louder so that the System can detect the sound signal
properly.
• Changing from AUX to another source while QP Link
works will deactivate QP Link temporarily.
In this case, the following reactivates QP Link:
– Pressing QP LINK on the remote control twice.
– Unplug the component from the AUX jack, then plug it
in again.
• If you press (Standby/on) to turn the System off or if
preset Timer turns the System off while QP Link works, the
System will deactivate QP Link temporarily.
In such cases, the following reactivates QP Link:
– When the sound signal from the AUX jack stops or is too
weak for about 30 seconds after the System is turned off.
– When you turn on the power again.
• QP Link may start working when you just plug in the
component to the AUX jack or unplug it. This is not a
malfunction.
UX-G60[U]_2.book Page 38 Tuesday, February 7, 2006 5:16 PM