JVC UX-G60 - Manual (Page 26)

24
4
Select the repeat mode you want.
* 1 While playing a DVD-VR disc, “PG” appears, and
while playing a Play list, “PL” appears.
* 2 During Program Play and Random Play, “STEP”
appears.
5
Finish the setting.
A-B Repeat
• See also page 21.
1 While playing, display the entire on-screen bar.
2 Select .
3 Display the pop-up window.
4 Select “A-B.”
5 Select the start point (A).
6 Select the end point (B).
To cancel A-B Repeat, repeat steps 1 to 3 , and select “OFF”
in step 4 .
Time Search
You can move to a particular point by specifying the elapsed
playing time from the beginning.
1 While playing (without PBC for SVCD/VCD), display
the entire on-screen bar.
• Time Search can be used before starting playback,
except for DVD Video/DVD-VR.
2 Select .
3 Display the pop-up window.
4 Enter the time.
You can specify the time in hours/minutes/seconds.
• It is always required to enter the hour digit (even “0”
hour), but it is not required to enter trailing zeros (the
last two digits in the examples above).
• To correct a mis-entry, press cursor < to erase the last
entry.
5 Finish the setting.
Chapter/Track Search
You can search for the chapter (DVD Video/DVD-VR) or
track (DVD Audio* 3 ) number to play.
1
While playing, display the entire on-screen bar.
2 Select or .
3 Display the pop-up window.
A-B Repeats a desired portion (see below).
TITLE * 1 Repeats the current title.
GROUP Repeats the current group.
ALL Repeats the disc (except for DVD) or
program.
CHAPTER * 2 Repeats the current chapter.
TRACK * 2 Repeats the current track.
OFF Cancels Repeat Play.
A-B Repeat starts. The selected
portion plays repeatedly.
• Before pressing ENTER/SET, you
can search for the end point using
the
¡ button.
ENTER/SET
OFF
OFF 1/3 1/3 1/3 TIME
TITLE 14 TOTAL 1:25:58 CHAP 23 DVD-VIDEO TITLE 2
TIME OFF CHAP. 1/3 1/3 1/1
TOTAL 1:01:58 CHAP 3
OFF
Dolby D
3/2.1ch
OFF TIME
T DVD-VIDEO
TIME OFF CHAP.
A–B
Dolby D
3/2.1ch
TV CH
TV CH
ENTER/SET
1/3 TIME
TITLE 14 CH DVD-VIDEO TITLE 2
TIME A- CHAP. 1/3
C Dolby D
3/2.1ch
ENTER/SET
Examples:
To move to a point of 1
(hours): 02 (minutes): 00
(seconds), press 1, 0, 2, 0, then
0.
To move to a point of 54
(minutes): 00 (seconds), press
0, 5, 4, 0, then 0.
The System starts playing the disc
from the selected playing time.
OFF 1/3 1/3 1/3 TIME
TITLE 14 TOTAL 1:25:58 CHAP 23 DVD-VIDEO TITLE 2
TIME OFF CHAP. 1/3 1/3 1/1
TIME 0:00:58 CHAP 3
TIME _ : _ _ : _ _
Dolby D
3/2.1ch
0
1
4
7
2
5
8
3
6
9
ENTER/SET
CHAP. TRACK
CHAPTER _
1/3 1/3 1/3 TIME
TITLE 14 TOTAL 1:25:58 CHAP 23 DVD-VIDEO TITLE 2
TIME OFF CHAP. 1/3 1/3 1/1
TOTAL 1:01:58 CHAP 3 Dolby D
3/2.1ch
* 3 For UX-G60 only
UX-G60[U]_2.book Page 24 Tuesday, February 7, 2006 5:16 PM