JVC Model 200 - Manual (Page 77)

Chapter 2---System Description
2.4 Image Light Amplifier Technology
Section 2.2 explained how the various units, including the ILA
®
assemblies, in the Optical System work together to produce the
image on the screen. This section focuses mainly on how the ILA
®
assembly itself works.
An Image Light Amplifier (ILA ® ) assembly (Figure 2-18) is a
device that uses low-intensity images to modulate a high-intensity
light through a liquid crystal layer. It is the key component in
producing very bright, high resolution images from Hughes-JVC
large-screen projectors.
Figure 2-18. The Hughes-JVC Image Light Amplifier ® .
Optically, there are two sides to an ILA
®
assembly with a light
blocking layer in the center. On the input side there is a photo-
conductive layer where the image from a CRT is focused through
a relay lens. This image is electrostatically coupled through the
light-blocking layer and mirror to a liquid crystal layer on the output
side of the ILA
®
assembly.
Model 200 Service Manual 2-63