JVC GET0114-001A - Manual (Page 20)

20
ENGLISH
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
Each time you press the
button, the adjustable items
change as follows:
Indication To do: Range
BAS Adjust the bass. –06 (min.)
|
+06 (max.)
TRE Adjust the treble. –06 (min.)
|
+06 (max.)
FAD* Adjust the front R06 (Rear only)
and rear speaker |
balance. F06 (Front only)
BAL Adjust the left L06 (Left only)
and right speaker |
balance. R06 (Right only)
LOUD Boost low and high
frequencies to
produce a well-
balanced sound
at low volume
level.
VOL Adjust the volume. 00 (min.)
|
50 (max.)
* If you are using a two-speaker system, set the fader
level to “00.”
2
Adjust the level.
Note:
Normally, the + and – buttons work as the volume
control. So you do not have to select “VOL” to adjust
the volume level.
To decrease the level
To increase the level
LOUD ON
|
LOUD OFF
VOL
(volume)
BAS
(bass)
TRE
(treble)
FAD
(fader)
BAL
(balance)
LOUD
(loudness)
Equalization pattern changes as you
adjust the bass or treble.
Ex.: When you adjust “TRE” (treble)
EN20-21KS-FX742R[E_EX]f.p65 1/8/03, 5:08 PM 20