Playback picture adjustment, Override automatic tracking, Adjust tracking manually – JVC HR-J670EK User Manual
Page 28: Return to automatic tracking, Advanced operations (cont.)
28
Your video recorder is equipped with automatic tracking
control. For most tapes this will automatically adjust the
tracking to suit the particular tape you are playing. In some
circumstances it may be necessary to make manual tracking
adjustments. This is usually only associated with old or worn
tapes or recordings made on old or worn recorders. If the
automatic tracking control fails to operate correctly you will see
noise bars across the picture as shown on the left below. To
correct this you can override the automatic control and adjust
the tracking manually by pressing the PR buttons.
OVERRIDE AUTOMATIC
TRACKING
1
Press
on the remote to engage manual tracking.
ADJUST TRACKING
MANUALLY
2
Press PR + or – to adjust tracking.
RETURN TO AUTOMATIC
TRACKING
3
Press
on the remote to re-engage automatic
tracking.
NOTE:
When a new tape is inserted, the recorder returns to the
automatic tracking mode automatically.
Playback
Picture
Adjustment
?
– –:– –
1
2
3
4
6
5
7
8
9
0
2
4
1
3
Manual Tracking
PR+/–
PR+/–
ADVANCED OPERATIONS (cont.)