Edit from a camcorder, Make connections, Set recorder’s input mode – JVC HR-J670EK User Manual
Page 30: Set edit mode, Start camcorder, Start recorder, Advanced operations (cont.)
30
ADVANCED OPERATIONS (cont.)
?
– –:– –
1
2
3
4
6
5
7
8
9
0
2
4
1
Edit From
A Camcorder
AUX
You can use a camcorder as the source player and your video
recorder as the recorder.
MAKE CONNECTIONS
1
With HR-J670/672EK, connect the camcorder’s
AUDIO/VIDEO OUT connectors to the recorder’s front
panel AUDIO/VIDEO input connectors.
● When using a monaural camcorder, connect its
AUDIO OUT connector to the AUDIO L input
connector on your recorder.
With HR-J470/270EK, connect the camcorder’s
AUDIO/VIDEO OUT connectors to the recorder’s rear
panel AV2 (L-2) IN/DECODER or AV1 (L-1) IN/OUT
connector via an optional cable adapter.
SET RECORDER’S INPUT
MODE
2
With HR-J670/672EK, press AUX and/or PR so that
"F-1" appears in place of a preset position number.
With HR-J470/270EK, press AUX and/or PR to select
"L-1" for the AV1 (L-1) IN/OUT connector, or "L-2" for
the AV2 (L-2) IN/DECODER connector, depending on
the connector being used.
SET EDIT MODE
3
See "Picture Control" on page 29.
START CAMCORDER
4
Engage its Play mode.
START RECORDER
5
Engage its Record mode.
VIDEO OUT
Camcorder
VIDEO
input
Recorder (HR-J670/672EK)
AUDIO OUT
Player
AUDIO input
NOTES:
●
All necessary cables can be obtained from your dealer.
●
You can also use another video recorder as the player instead
of a camcorder.
●
When you select "EDIT" to dub tapes in step 3, be sure to
select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF")
after you finish dubbing the tapes.
Audio/Video Cable
(not provided)
PR
VIDEO OUT
Camcorder
Recorder (HR-J470/270EK)
AUDIO OUT
Player
Cable adapter
(not provided)
Audio/Video Cable
(not provided)