Receiving radio broadcasts, English – JVC RX-730R User Manual

Page 25

Advertising

Page 20

English

Receiving Radio Broadcasts

You can browse through all the stations or use the preset function to go immediately to a particular station.

Tuning in Stations Manually

On the front panel only:

1. Press TUNER so that the Control

% / fi

fi / @

@ / #

# buttons work for tuner settings.

The lamp next to the button lights up.

2. Press Control

% / fi

fi until “<FM AM>” appears on the display.

3. Press Control

@ / #

# to select the band.

Each time you press the button, the band alternates between FM and AM (MW/LW).

4. Press Control

% / fi

fi until “–TUNING+” appears on the display.

5. Press Control

@ / #

# until you find the frequency you want.

• Pressing Control

@ decreases the frequency.

• Pressing Control

# increases the frequency.

Notes:
• When you hold down Control

@ / # in step 5, the frequency keeps changing until you press the button again

or a station is tuned in.

• When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.

When an FM stereo program is received, the STEREO indicator also lights up.

Using Preset Tuning

Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 40
stations at random.

Storing the preset stations

On the front panel only:

1. Tune in the station you want to preset (see above).

If you want to store the FM reception mode for this station, select the FM reception mode you want.
See page 21 for details.

2. Press MEMORY (next to the TUNER button).

“CH-” appears and the channel number position starts flashing on the display for about 5 seconds.

3. Press Control

% / fi

fi to select a channel number while the channel number position is flashing.

• Pressing Control

% increases the number.

• Pressing Control

fi decreases the number.

Note:
You can use the 10 keys on the remote control to select the preset number. When using the 10 keys, be sure
that they are activated for tuner, not for the CD and others. (See page 42.)

4. Press MEMORY (next to the TUNER button) again while the selected channel number is

flashing on the display.
The selected channel number stops flashing.
The station is assigned to the selected channel number.

5. Repeat steps 1 to 4 until you store all the stations you want.

To cancel a stored preset station

Storing a new station on a used number erases the previously stored one.

Front panel