JVC RX-730R - Manual (Page 34)

Page 29
English
Using the Surround Processor
The built-in surround processor provides three types of surround programs — Dolby Pro Logic, Dolby 3-
Channel Logic, and JVC’s Hall Surround.
What is surround?
The sound heard in a concert hall or a movie theater consists of direct sound and indirect sound: early
reflections and reflections from behind. The reflected sounds are always delayed by the distances of the ceiling
and walls from the listener. These reflections are some of the most important elements of the acoustic
surround.
On JVC’s Hall Surround
In order to reproduce a more realistic sound field in your listening
room while playing an ordinary stereo source, JVC’s Hall Surround
has been designed to give you clear vocals and to create the
feeling of a concert hall. The sound is reproduced through the
front speakers and rear speakers.
On Dolby Surround
Dolby Surround has been also developed to reproduce the
important elements of the acoustic surround at home.
To watch the soundtracks of video software bearing the mark
DOLBY SURROUND
* which includes the same encoded surround
information as found in Dolby Stereo films, the receiver can
provide you with 2 Dolby Surround programs (Dolby Pro Logic
and Dolby 3ch Logic).
Dolby Pro Logic: Select this mode when the optional rear
speakers are connected (as well as a center speaker).
Dolby 3ch Logic: Select this mode when a center speaker is
connected without rear speakers.
Notes:
• The surround processor has no effect on monaural sources.
• The surround processor cannot be used for recording.
* Manufactured under license from Dolby Laboratories Licensing
Corporation. “Dolby,” the double-D symbol, and “Pro Logic” are
trademarks of Dolby Laboratories Licensing Corporation.
Early reflections
Reflections
from behind
Direct sound
SURROUND MODE
Front panel
See also
page 40.
PROLOGIC 3CHLOGIC
SURR OFF
HALL
(Surround Off)
Using JVC’s Hall Surround
You need to connect one set of rear speakers to obtain the full effect.
Once you have adjusted the Hall Surround, the receiver memorizes the settings.
On the front panel:
1. Press SURROUND MODE so that the Control % % % % % / fi fi fi fi fi buttons work for selecting the surround
modes.
The lamp next to the button lights up.
2. Press Control % % % % % / fi fi fi fi fi until “HALL” appears on the display.
The HALL and SURROUND indicators also light up on the display.
Each time you press the button, the surround modes change as follows (the indicator of the selected
surround mode also lights up on the display):
MENU
RX-730RBK(EF)0054-001A.En.29-36 97.7.25, 6:36 PM 29