JVC TM-1051DG - Manual (Page 11)

11
How to Use MAIN MENU
7MAIN MENU Screens
Setting Items MAIN MENU
Move the MENU control
to
/ to adjust an
item.
About “ sub menu” and
“reset,”
☞ page 10
Move the MENU
control to
.
☞ page 10
* To go back to the previous menu,
press the MENU control.
☞ page 12
NOTE:
• Some items may not appear on the menu depending on the input or the input signal. Those items are not available to use.
7Functions and Adjustment Range of Items
☞ page 12
APERTURE CONTROL
Compensates the
frequency characteristics of
the luminance signal of a
video signal.
7 LEVEL
Adjusts the compensation value. The higher the
number is, the larger the compensation value gets.
• 00 O 10
7 CONTROL FREQ.
Selects the frequency to compensate.
HIGH: Compensates the high frequencies.
LOW: Compensates the low frequencies.
OFF: No compensation.
sub menu SELECT
Selects the positions and the contents of the sub-menu
display.
☞ “To change the positions and the contents of the sub-
menu display” on page 10
EN03_LCT1993-001A-f.p65 06.1.5, 18:25 11