JVC TM-1051DG User Manual
Page 17
17
CONTROL LOCK
Prohibits altering the monitor operations except turning
the monitor on/off and deactivating this function.
• ON/OFF
NOTES:
• When “CONTROL LOCK” is set to “ON,” “
Control lock
on!” appears on the screen if you try to operate the monitor.
• Operating the monitor by the external control is available if
this function is activated.
all reset
Resets all the settings you have made to factory-preset
values.
• Adjustments made by using the front panel buttons
will also be reset.
1. Move the MENU control to / to select “all
reset,” then move it to
.
Confirmation message is displayed.
2. To initialize, move the MENU control to
.
• To cancel the initialization, press the MENU
control.
• When “1-8” is selected, the channel input level for 1,
2, 3 and 4 is displayed on the left side of the screen,
and the channel input level for 5, 6, 7 and 8 is
displayed on the right side of the screen.
7 BAR TYPE
Selects the color of the AUDIO LEVEL METER
display.
W. 100: White color display
W. 50:
White (half transparent) display
3COLORS: The AUDIO LEVEL METER display
uses three different colors (red, yellow
and green) to indicate variations in
input levels.
Red:
Displayed when the audio input is at the
same level set in “OVER LEVEL” or higher.
Yellow: Displayed when the audio input is at the
same level set in “REFERENCE LEVEL” or
higher.
Green: Displayed when the audio input is lower
than the level set in “REFERENCE LEVEL.”
NOTES:
• For “W. 100” and “W. 50,” the line indication for the
standard input level set in the “REFERENCE LEVEL”
is displayed. Input level set in the “OVER LEVEL” is
not displayed.
• As for the audio channel bar display with no signal
input, white is displayed for the “3COLORS” setting,
and gray is displayed for other settings.
7 BAR BRIGHTNESS
Selects the brightness of the AUDIO LEVEL
METER display.
HIGH:
Brighter
LOW:
Darker
7 REFERENCE LEVEL
Sets the standard input level.
• –20dB/–18dB
7 OVER LEVEL
Sets the input level’s lower limit indicated in red for
the “3COLORS” display.
• –10dB/–8dB/–6dB/–4dB/–2dB
EN04_LCT1993-001A-f.p65
06.1.5, 18:24
17