JVC CATD77 - Manual (Page 12)

8
English
COMPU PLAY
COMPU PLAY is JVC’s feature that lets you control the most frequently used functions of the System
with a single touch.
One Touch Operation starts playing a CD, turns on the radio, plays a tape, etc. with a single press of the
play button for that function. What One Touch Operation does for you is to turn the power on, then start
the function you have specified. If the Unit is not ready, such as no CD or tape in place, the Unit still
powers on so you can insert a CD or tape.
How One Touch Operation works in each case is explained in the section dealing with that function. The
COMPU PLAY buttons are:
On the Unit
FM/AM button
VCR button
TAPE button
CD button
CD Player DISC 1 to DISC 3 buttons
CD Player Open/Close (
0) buttons
CD Player ALL CD EJECT button
Cassette Deck Open/Close (
0) button
On the Remote Control
DISC 1 to DISC 3 buttons
VCR button
TAPE button
TUNER button
CD button
Setting the Clock
The clock should be set before you start using this Unit.
If the clock has not been set, “0:00” appears in the display and the CLOCK indicator blinks.
You can set the clock regardless of whether the Unit is on or off.
1. Press the MENU button.
“DAILY ” blinks on the display and the TIMER selection indicator
lights up.
2. Press the 1 cursor key twice to select
“CLOCK”.
“CLOCK ADJ ” blinks on the display.
3. Press the SET button.
The hour digits on the display blink.
4. Set the hour by pressing the 4 or ¢ cursor key.
Pressing the
¢ cursor key increases the hour, and pressing
the 4 cursor key decreases it.
Pressing down either of these cursor keys adjusts the setting continuously
until the key is released.
5. Press the SET button.
The minute digits on the display blink.
6. Set the minute by pressing the 4 or ¢ cursor key.
Pressing the ¢ cursor key increases the minute, and pressing
the 4 cursor key decreases it.
Holding down either of these cursor keys allows you to continuously
adjust the minute setting in 10 minute increments until the key is released.
7. Press the ENTER button.
“CLOCK OK” appears on the display and the blinking “CLOCK”
indicator disappears. The clock time starts from zero seconds from
the set time.
MENU
SET
ENTER
1
2
3, 5
4, 6
7
TIMER
DAILY
TIMER
CLOCK
CA-TD77R[EF]/EN/p1-25 97.7.24, 3:15 PM 8