Random play, 32 english, Using the unit 1. press the menu button – JVC CATD77 User Manual
Page 36: Press the set button
32
English
o
If you try to program a 33rd track, the System lets you know that the program is full by displaying the
message “FULL” on the display.
o
If you try to program a disc tray that is empty, or a track number that does not exist on a disc (for
example, selecting track 14 on a disc that only has 12 tracks), the selected disc or track are skipped
when the program is played.
o
You can skip to a particular step in a program during program play. Using the unit, press the right or
left (
4 or ¢) cursor key, to this from the Remote Control, press the 4 1 or
¡ ¢ button.
o
You can also repeat a step in a program. See page 33 “Repeating a Track or the Discs”.
To stop playing,
press the
7 button.
To delete all the tracks in a program,
press the CANCEL button on the Unit repeatedly until all the
tracks in the program have been deleted, or press the ALL CD EJECT button.
To exit Program mode,
press the PLAY MODE button on the Remote Control and select CONTINUE,
or press the MENU button on the Unit and use the cursor keys to select CONTINUE in CD P.MODE.
To Check the Program ———————————————————
While the CD Player is stopped, use the
4 1 or ¡ ¢ button on the Remote Control to
check the contents of the program.
Each time you press the
¡ ¢ button on the Remote Control, the program contents are shown on
the display in the programmed order. Pressing the
4 1 button on the Remote Control displays
the previous step in the program.
To Modify the Program ———————————————————
Modify the contents of a program while the CD Player is stopped.
Press the CANCEL button on the Unit, the last track in the program is deleted.
Each time you press the button, the last track listed in the program is deleted from the program.
To add a track to the program, follow the procedure above (on either the Unit or the Remote Control). The
new tracks are added to the end of the program.
Random Play
The tracks will play in no special order when you use this mode.
o
You can use this mode when the CD Player is stopped.
Using the Unit
1. Press the MENU button.
The TIMER section of the menu display blinks.
2. Press the cursor key to the right
or left (
4 or ¢) and select
“CD P.MODE”.
The menu display changes with each press of the
cursor keys as shown below.
+
Press the left (
4
) cursor key
Ô
TIMER
Ô
CD P.MODE
Ô
REPEAT
Ô
AUTO EDIT
Ô
SEA CONTROL
Ô
Press the right (
¢
) cursor key
=
3. Press the cursor key to the up or
down (
¡
or 1) and select
“RANDOM”.
The menu display changes with each press of the
cursor keys as shown below.
+
Press the up (
¡
) cursor key
Ô
CONTINUE
Ô
PROGRAM
Ô
RANDOM
Ô
Press the down (
1
) cursor key
=
“RANDOM” appears on the display.
4. Press the SET button.
The blinking “RANDOM” display changes to
a steady display.
MENU
TAPE
TIMER
DAILY
1
2
3
4
5
6
7
8
TAPE
1
2
3
4
5
6
7
8
CD P. MODE
CONTINUE
TAPE
1
2
3
4
5
6
7
8
CD P. MODE
RANDOM
TAPE
1
2
3
4
5
6
7
8
9 10 11 12
14
13
15 16
CD P. MODE
RANDOM
REPEAT
OFF
VOL
SET
CA-TD77R[EF]/EN/p26-52
97.7.24, 2:41 PM
32