JVC CATD77 - Manual (Page 9)

5
English
ANTENNA
FM
(75 )
FM
AM
LOOP GND
AM EXT
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the FM Antenna
CAUTION: To avoid noise, keep antennas away from metallic parts of the System, connecting
cord and the AC power cord.
Connecting the AM (MW/LW) Antenna
Note: Even when connecting
an outside AM antenna,
keep the indoor AM loop
connected.
AM (MW/LW) Loop Antenna
Turn the loop until you
have the best reception
Snap the tabs on the loop
into the slots of the base to
attach the AM Loop.
If reception is poor, connect the outside antenna. AM antenna wire (Not supplied)
1 2 3
A. Using the Supplied Wire Antenna
The FM Wire Antenna provided can be connected to a FM 75-ohm COAXIAL as
temporary measure.
B. Using the Coaxial Type Connector (Not Supplied)
A 75-ohm antenna with coaxial type connector (IEC or DIN 45325) should be connected to
the FM 75-ohm COAXIAL terminal.
A
ANTENNA
GND
AM EXT
AM
LOOP
FM 75
COAXIAL
B
ANTENNA
GND
AM EXT
AM
LOOP
FM 75
COAXIAL
FM Wire Antenna
ANTENNA
FM 75
COAXIAL
AM
LOOP GND
AM EXT
Outside FM antenna wire
If reception is poor,
connect the outside
antenna.
Before attaching a 75 ohm
coaxial lead (the kind with a
round wire going to an outside
antenna), disconnect the
supplied FM Wire Antenna.
CA-TD77R[EF]/EN/p1-25 97.7.24, 3:14 PM 5