Setting the sleep timer, Timer priority, 47 english – JVC CATD77 User Manual
Page 51
47
English
Setting the SLEEP Timer
Use the Sleep Timer to turn the Unit off after a certain number of minutes when it is playing. By setting
this timer, you can fall asleep to music and know your Unit will turn off by itself rather than play all night.
o
You can only set the Sleep Timer when the Unit is on and a source is playing.
To set the SLEEP Timer, follow this procedure:
1. With the System on and a source playing,
press the SLEEP button on the Remote
Control.
The message “SLEEP” appears on the display.
2. Set the length of time you want the source to play before shutting
off.
•
Each time you press this button while the “SLEEP” indicator is blinking, it changes the number of
minutes shown on the display in this sequence:
=
10
=
20
=
30
=
60
=
90
=
120
= Cancelled = (back to the beginning)
When the number of minutes you want shows on the display, just wait 5 seconds until the “SLEEP”
indicator stops blinking, and is lighted steadily.
The Unit is now set to turn off after the number of minutes you set.
To Change the SLEEP Timer Setting
Press the SLEEP button until the number of minutes you want appears on the display.
To Cancel the SLEEP Timer Setting
Press the SLEEP button until the “SLEEP” indicator goes off on the display.
Turning off the Unit also cancels the SLEEP Timer.
Timer Priority
Since each timer can be set independently, you may wonder what happens if the settings overlap. Here are
the priorities for each timer:
o
The ONCE REC Timer always has priority. This means that:
•
If another timer is set to come on during a time when the ONCE REC Timer is operating, the
other timer just won’t come on at all, so you will always get the entire program on tape.
•
If the ONCE REC Timer is set to come on while another timer is operating, the other timer will
shut off 10 seconds before the ONCE REC Timer is set to turn on, and the ONCE REC Timer will
then take over.
o
The SLEEP Timer has the least priority. This means that if the SLEEP Timer is set while the DAILY
Timer is operating, the DAILY Timer settings are cancelled. However, if the DAILY Timer is set to
come while the SLEEP Timer is operating, the SLEEP Timer setting will be cancelled and the Unit
will use the settings from the DAILY Timer.
SLEEP
SLEEP
SLEEP
Timer
ONCE REC
Timer
OFF
ON
OFF
ON
OFF
Example 1
The ONCE REC Timer has priority.
Example 2
DAILY
Timer
ONCE REC
Timer
ON
OFF
OFF
Operation
Operation
Setting
Setting
ON
The ONCE REC Timer has priority.
ON
OFF
22:00
22:30
23:00
22:00
22:30
22:00
22:30
23:00
21:30
22:30
21:30
CA-TD77R[EF]/EN/p26-52
97.7.24, 2:46 PM
47