JVC HR-J455EA - Manual (Page 16)

16
EN
1 2 3
4 5 6
7 8 9
0
2
4
1
3
B.E.S.T. Picture
System
Turn on the TV and select the VIDEO channel (or AV mode).
The B.E.S.T. (Biconditional Equalised Signal Tracking) system
checks the condition of the tape in use during recording and
playback, and compensates to provide the highest-possible
recording and playback pictures. The default setting for both
recording and playback is “ON”.
Preparation
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
● The recorder power comes on automatically.
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS FUNCTION SET
SCREEN
3
Place the pointer next to
"FUNCTION SET" by
pressing PUSH JOG
%fi,
then press OK or PUSH
JOG .
SELECT MODE
4
Place the pointer next to
"B.E.S.T." by pressing
PUSH JOG
%fi, then press
OK or PUSH JOG to set
to "ON" or "OFF".
RETURN TO NORMAL
SCREEN
5
Press MENU.
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
[ 5/∞] =
[MENU] : EXIT
PUSH JOG
MENU
RECORD
RECORDING (cont.)
RECORD
FUNCTION SET
AUTO TIMER OFF
O.S.D. ON
B.E.S.T. ON
AUTO SP =LP TIMER OFF
[ 5/∞] =
[MENU] : EXIT
fi
fi
PLAY
PLAY
PAUSE
OK
You can also turn on/off the B.E.S.T. system by simply
pressing the B.E.S.T. PICTURE button on the recorder.
1
Press B.E.S.T. PICTURE so that the B.E.S.T. PICTURE
indicator lights up.
● The B.E.S.T. system is activated and the "B.E.S.T."
setting at the Function Set screen will also be set to
"ON".
2 To turn off the B.E.S.T. system, press the B.E.S.T.
PICTURE button again so that the B.E.S.T. PICTURE
indicator goes off.
● The "B.E.S.T." setting at the Function Set screen will
also be set to "OFF".
B.E.S.T. PICTURE Indicator
B.E.S.T. PICTURE