Express timer programming, Access g-code screen, Access programme screen – JVC HR-J455EA User Manual

Page 22: Enter programme start time, Enter programme stop time, Enter programme date, Enter channel position, Set tape speed, Timer recording (cont.)

Advertising
background image

22

EN

1

2

3

4

5

6

7

8

9

0

2

4

1

3

Express Timer

Programming

Remember, the clock must be set before you can
programme the timer (

pg. 8).

Before performing the following steps:

● Insert a cassette with the safety tab in place. The recorder

will come on automatically.

● Turn on the TV and select the VIDEO channel (or AV mode).

ACCESS G-CODE SCREEN

1

Press PROG..

ACCESS PROGRAMME

SCREEN

2

Press START +/–. (If you’re
just starting out, “P1”
appears.).

ENTER PROGRAMME

START TIME

3

Press START +/– to enter
the time you want
recording to start.

● Press and hold START

+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.

ENTER PROGRAMME STOP

TIME

4

Press STOP +/– to enter the time you want recording to
stop.

● Press and hold STOP +/– to move in 30-minute

increments, or press and release repeatedly to move 1
minute at a time.

ENTER PROGRAMME DATE

5

Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)

ENTER CHANNEL

POSITION

6

Press TV PROG +/–.

SET TAPE SPEED

7

Press SP/LP (

) to set the tape speed.

TIMER RECORDING (cont.)

– P1 –

START

STOP

–:– –

=

–:– –

SP

DATE

TV PROG

– –.– –

– –

[+/–]

=

[PROG] : EXIT

– P1 –

START

STOP

21:00

=

–:– –

SP

DATE

TV PROG

– –.– –

– –

[+/–]

=

[PROG] : EXIT

– P1 –

START

STOP

21:00

=

22:00

SP

DATE

TV PROG

25.12

1

[+/–]

=

[PROG] : EXIT

START+/–

TV PROG+/–

PROG.

STOP+/–

DATE+/–

SP/LP

Advertising