Return to normal screen, Engage recorder’s timer mode, Attention – JVC HR-J455EA User Manual
Page 21
EN
21
RETURN TO NORMAL
SCREEN
5
Press PROG. or OK. "PROGRAM COMPLETED"
appears on the screen for about 5 seconds, then normal
screen appears.
● Repeat steps 1 – 5 for each additional programme.
ENGAGE RECORDER’S
TIMER MODE
6
Press TIMER. The recorder turns off automatically and
‰
appears on the display panel.
● To disengage the timer, press TIMER again.
NOTES:
●
To Change The Stop Time . . .
. . . press STOP +/– after pressing OK in step 3. You can
compensate for anticipated programme schedule delays this
way.
●
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key
“9”) for weekly serials or DAILY (NUMBER key “8”) for daily
serials (Monday – Friday). Either "WEEKLY" or "DAILY"
appears on the screen. Pressing the button again makes the
corresponding indication disappear.
●
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen. To record the
extra programme, you must first cancel any unnecessary
programmes (
੬
pg. 24).
●
It is not possible to timer-record a TV programme with a
G-
CODE
number which starts with "0".
ATTENTION
Regarding Guide Program Number Set
"G-CODE SET-UP" appears after performing step 3 if the
Guide Program number for the G-
CODE
number you entered
has not been set.
● Press the NUMBER keys or PUSH JOG %fi to input the
channel position number on which your recorder
receives that station, then press OK or PUSH JOG .
The G-
CODE
program screen appears.
(Ex.) To timer-record a RTR
programme with G-
CODE
.
* If your recorder receives
RTR on the channel position
2, press OK or PUSH JOG
after entering "2".
Satellite Tuner Users
To timer-record a satellite broadcast using G-
CODE
:
1
Perform steps 1 – 6.
2
Set the satellite tuner to the appropriate channel before
the selected programme begins.
3
Leave the satellite tuner's power on.
%
%
1
2
3
4
5
6
7
8
9
0
2
4
1
3
WEEKLY
DAILY
OK
STOP+/–
TIMER
PROG.
PUSH JOG
NUMBER
G-CODE SET-UP
GUIDE PROG
TV PROG
2
– –
[0-9] OR
5/∞:SELECT =
[MENU] : EXIT