Sony TCW-E475 - Manual (Page 23)

23
Additional Information
Specifications
System
Fast-winding time Approx. 100 sec. (with
Sony C-60 cassette)
Signal-to-noise ratio (at peak level and weighted with
Dolby NR off)
55 dB, using Sony TYPE I
cassette
57 dB, using Sony TYPE
II cassette
58 dB, using Sony TYPE
IV cassette
S/N ratio improvement With Dolby B NR on:
Approx. 5 dB at 1 kHz,
10 dB at 5 kHz
With Dolby C NR on:
Approx. 15 dB at 500 Hz,
20 dB at 1 kHz
Harmonic distortion 0.4% (using Sony TYPE I
cassette): 160 nWb/m
315 Hz, 3rd H.D.)
1.8% (using Sony TYPE
IV cassette): 250 nWb/m
315 Hz, 3rd H.D.)
Inputs
Line inputs (phono jacks) sensitivity 0.16 V, input
impedance 47 kilohms
Outputs
Line outputs (phono jacks) rated output level 0.5 V at
a load impedance of 47
kilohms, load impedance
over 10 kilohms
Headphones (stereo phone jack)
output level 0.25 mW at a
load impedance of 32
ohms
General
Power requirements
U.S.A. and Canadian models:
120 V AC, 60Hz
British models: 220-230 V AC, 50/60Hz
Other European models: 230 V AC, 50/60Hz
Australian models: 240 V AC, 50/60Hz
Other models: 120/220/230-240 V AC,
50/60Hz
Adjustable with voltage
selector
Power consumption
TC-WE675:
22 watts
TC-WE475: 18 watts
Dimensions (w/h/d) Approx. 430
Ч
120
Ч
300 mm
Mass 4.2 kg
Supplied accessories
Audio connecting cords (2)
Control A1II cable (1)*
* Supplied for Canadian models only
Optional accessory
Remote commander RM-J910
For more information on the availability of the remote
commander, contact your nearest Sony dealer.
Design and specifications are subject to change
without notice.
30-16,000 Hz (±3 dB,
IEC), 20-17,000 Hz
(±6 dB), using Sony
TYPE I cassette
30-17,000 Hz (±3 dB,
IEC), 20-18,000 Hz
(±6 dB), using Sony
TYPE II cassette
30-19,000 Hz (±3 dB,
IEC), 20-20,000 Hz
(±6 dB), 30-13,000 Hz
(±3 dB, –4dB recording),
using Sony TYPE IV
cassette
Wow and flutter
TC-WE675:
±0.13% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
TC-WE475: ±0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
Variable pitch range Approx. –30 to + 30 %
Frequency response
(DOLBY NR OFF)