Sony CDX-M9905X - Manual (Page 34)

34
Setting the loudness
— Loudness
The bass and treble will be reinforced to enjoy
clear sound at low volume.
1
Press (SOURCE) to select a source
(radio, CD, MD or AUX).
2
Press (MENU) .
3
Press < or , repeatedly to select
“Sound,” then press (ENTER) .
4
Press < or , repeatedly to select
“Loudness.”
5
Press (ENTER) repeatedly to select
“ON.”
6
Press (MENU) .
The display returns to the normal display.
To cancel the loudness, select “OFF” in step 5.
Connecting auxiliary audio
equipment
The AUX IN (external audio input) terminals on
this unit are also used as the BUS AUDIO IN
(audio input) terminals.
You can listen to the sound from your car
speakers by connecting optional Sony portable
devices.
Note
If you connect an optional Sony CD/MD unit, you
cannot connect any portable devices and cannot
select “AUX.”
Selecting auxiliary equipment
Press (SOURCE) repeatedly to select
“AUX.”
Adjusting the volume level
— AUX Level
You can adjust the volume for each connected
audio equipment.
1
Press (MENU) .
2
Press < or , repeatedly to select
“Sound,” then press (ENTER) .
3
Press < or , repeatedly to select
“AUX Level,” then press (ENTER) .
4
Press < or , repeatedly to adjust
the volume level, then press (ENTER) .
The volume level is adjustable in 1 dB steps
from –6 dB to +6 dB.
5
Press (MENU) .
The display returns to the normal display.