Sony CDX-M9905X - Manual (Page 37)

37
Edit menu
• Name Edit - assigns names to discs, or stations
(page 17, 21).
• Name Delete - deletes the disc name or station
name assigned (page 18, 21).
• Opening - selects the image as the start-up
screen (page 29).
• Picture Delete - deletes the stored image
(page 28).
• BTM - stores stations automatically (page 19).
Setup menu
• Clock - sets the clock and the calender
(page 13).
• Contrast - adjusts the contrast of the display.
• Initialize - restores the factory preset condition
(page 35).
• Dimmer - adjusts the brightness of the display.
– Select “AUTO” to dim the display only when
you turn the headlights on.
– Select “ON” to dim the display.
– Select “OFF” to restore the brightness.
• Beep - turns the beep on or off.
• Video - changes the color system to PAL or
NTSC.
• Commander - changes the operative directions
of the rotary commander.
– Select “Normal” to use the rotary commander
as the factory-set position.
– Select “Reverse” when you mount the rotary
commander on the right side of the steering
column.
* The default setting
Sound menu
• DSO - sets the DSO mode (page 30).
• EQ7 - adjusts the equalizer curve settings
(page 30).
• Bass - adjusts the bass level (page 31).
• Treble - adjusts the treble level (page 31).
• Balance - adjusts the right and left speaker
volume (page 32).
• Fader - adjusts the front and rear speaker
volume (page 32).
• Sub Woofer - adjusts the volume level of the
subwoofer (page 33).
• HPF (High pass filter) - selects the cut-off
frequency of the front/rear speakers (page 32).
• LPF (Low pass filter) - selects the cut-off
frequency of the subwoofer (page 33).
• AUX Level - adjusts the volume level of
connected auxiliary equipment (page 34).
• Loudness - reinforces the bass and treble
(page 34).
Select
ALL *
Edit
Name Edit
Name Delete
Opening
Picture Delete
BTM
Select
ALL *
continue to next page t
Setup
Clock
Contrast
Initialize
Dimmer
Commander Normal *
Reverse
Beep
Video
OFF
ON
AUTO *
NTSC *
PAL
OFF *
OFF
ON *