Sennheiser EK 2000 - Manual (Page 24)

23
Adjusting settings via the operating menu
Selecting the frequency bank and the channel – “Frequency Preset”
Overview of the frequency banks and channels:
Entering a name – “Name”
Scan New List Automatically scans for unused receiving frequencies
(frequency preset scan)
If receiving frequencies are used, they will be locked; if
receiving frequencies are unused, they will be released.
After the frequency preset scan, you can select an unused
frequency preset.
When setting up multi-channel systems, please observe the
following:
Only the factory-preset receiving frequencies within one
frequency bank (“
1 ” to “ 20 ”) are intermodulation-free. It is vital
to observe the notes on frequency selection on page 30.
Frequency bank Channels Type
“ 1 ” to “ 20 ” up to 64 per
frequency bank System bank:
frequencies are factory-preset
“ U1 ” to “ U6 ” up to 64 per
frequency bank User bank:
frequencies are freely selectable
Menu item Function of the menu item
Menu
B.Ch: 1. 1
Frequency Preset B.Ch:
Frequency Preset
B.Ch:
Frequency Preset
“Stored”
SET SET
SET
863.100MHz
1 . 1 6. 3
824.500MHz
Call up “Frequency
Preset”
Select the frequency
bank and confirm
Select the channel;
store the setting
Menu
L i c h a e l
Name
Name Name
L i c h a e l M i chael
“Stored”
Call up “Name” Enter a character
and confirm
Enter a character;
store the setting