Sennheiser EK 2000 User Manual
Page 27
26
Adjusting settings via the operating menu
Selecting a channel and assigning this channel a frequency
̈
Set the desired frequency (MHz and kHz section) as described in the
previous chapter.
̈
Press the
SET
button to confirm the frequency.
“
Stored
” appears on the display panel. The “
Tune
” menu item
appears again.
̈
Press the rocker button until the “
Tune
” menu item appears.
̈
Press the
SET
button and keep it pressed until the frequency
bank is highlighted.
̈
Press the rocker button to set the frequency bank.
̈
Press the
SET
button to confirm the frequency bank.
The channel is highlighted.
̈
Press the rocker button to set the channel.
̈
Press the
SET
button to confirm the channel.
The frequency (MHz section) is highlighted.
SET
SET
Tu n e
B.Ch:
U1
. 1
B.Ch: U5.
1
Tu n e
Advanced Menu
Tune
“Stored”
823.925 MHz
823.925 MHz
823.925 MHz
SET
SET
SET
Select the frequency
bank and confirm
Select the channel;
store the setting
Call up “Tune”
(special function)
SET
SET