Sennheiser EK 2000 - Manual (Page 29)

28
Adjusting settings via the operating menu
Resetting the settings made in the operating menu – “Reset”
When resetting the settings made in the operating menu, only the
selected settings for the pilot tone and for the frequency banks “
U1 ” to
“ U6 ” remain unchanged. For an overview of the factory-preset default
settings, refer to the enclosed frequency information sheet.
Displaying the software revision – “Software Revision”
You can display the current software revision of the diversity receiver.
The “ Sync Settings ” submenu
“SK Settings”, “SKM Settings” and “SKP Settings”
Via the “ SK Settings ”, “ SKM Settings ” and “ SKP Settings ” submenus, you
can set the transmitter parameters directly on the diversity receiver and
activate or deactivate the transfer of these parameters to the transmitter.
Display Function
SK Settings Calls up the “ SK Settings ” submenu
SKM Settings Calls up the “ SKM Settings ” submenu
SKP Settings Calls up the “ SKP Settings ” submenu
Exit Exits the “ Sync Settings ” submenu and returns to the
extended menu “ Advanced Menu ”
Setting Transfer is ...
... activated
... deactivated
Advanced Menu
Reset Yes
Reset
“Stored”
SET
SET
Select the desired
setting; apply the
setting
Call up “Reset”
Sync
S e n s i t i v i t y
– 6dB
Sync
S e n s i t i v i t y
– 6dB