Sony VGC-LS20 - Manual (Page 62)

62 n N
Using Your VAIO Computer
To connect the remote sensor control
1 Plug the cable from the remote sensor control (1) into either jack (1 or 2) on the back of the remote sensor (2).
2 Remove the adhesive tape cover from the bottom of the remote sensor control (1).
3 Attach the remote sensor control (1) onto the set-top box (3) near the infrared port (4).
!
Do not cover the infrared port when attaching the remote sensor control.
The remote sensor must be visible in a line-of-sight with the remote commander in order to function properly.