Siemens Gigaset S45 - Manual (Page 15)

14
Handset settings
Gigaset S45 / en / A31008-M1754-R101-1-6Z19 / start_guide_time.fm / 02.09.2005
Deactivating the room monitor
remotely
Requirements: The phone must support
touch tone dialling and the room monitor
is set for an external destination number.
¤
Take the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings on the handset (e.g. no ring-
tone) will however remain activated until
you press the display key §Off§ on the hand-
set.
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with Save (page 13).
Handset settings
Changing the display language
You can view the display texts in different
languages.
v
¢
Ð
¢
Handset
¢
Language
The current language is indicated by .
s Select a language and press
§OK§ .
a Press and hold (idle status).
If you accidentally choose a language you
do not understand:
v 5 41
Press keys one after the other.
s Select the correct language
and press §OK§ .
Setting the display
You have a choice of four colour schemes
and several different contrasts.
v
¢
Ð
¢
Display
Colour Scheme
Select and press §OK§ .
s Select a colour scheme and
press §OK§ ( = current col-
our).
a Press briefly.
Contrast Select and press §OK§ .
r Select contrast.
§Save§ Press the display key.
a Press and hold (idle status).
Setting the screen picture
You can display a screen picture (picture
or digital clock) when the handset is in idle
status. This will replace the idle status dis-
play. It may conceal the date, time and
name.
The screen picture is not displayed in cer-
tain situations, e.g. during a call or when
the handset has been deregistered.
If a screen picture has been activated, the
menu item Screen Picture is marked with
.
v
¢
Ð
¢
Display
¢
Screen Picture
The current setting is displayed.
¤
Change multiple line input:
Activation:
Select On (screen picture is displayed)
or Off (no screen picture).
Selection:
Change screen picture if necessary (see
below).
¤
Save changes (page 23).
If the screen picture conceals the display,
press the end call key briefly to show the
idle display with time and date.
‰
‰
‰