Smooth Fitness 7.35 R - Manual (Page 37)

www.smoothfitness.com 37
TROUBLESHOOTING
SYMPTOM CAUSE SOLUTION
No power to display A). Not plugged in.
B). Power switch not activated
C). Power input circuit breaker
blown. Please check power input and
fuse.
Contact your dealer if unit is
plugged in, powered on and
circuit breaker is depressed.
LCD display abnormal LCD damaged Contact your dealer for
troubleshooting
Show E1 A).speed feed back problem.
B).Motor console damaged. Switch off the power and
switch on after 10 seconds
then press START. Check:
1. Does the running belt
move?
2. If the running belt moves,
does E1 appear after 10
seconds?
If the belt moves and E1 does
not appear after powering off,
lubricate the running belt and
deck. If the melt moved and E1
appears, please contact your
dealer.
Show E2(few seconds and
OTC looses function) OTC device short circuit. Clean the OTC device
certainty and reset
power
.sensors.
Show E7 Incline motor malfunction. You can keep going to use
except adjust the grade.
Contact your agent to
determine and get solutions.
Show E8 Console memory device
damaged.
Contact your dealer for
troubleshooting
Show E9 A).Do not hold hand pulse
device during Body Index test.
B). hand pulse device problem. Test again according the
steps.
Contact your dealer.