Sanyo PLV-55WM1 - Manual (Page 21)

21
Basic Operation
Press the MENU button to display the On-Screen Menu
(Main menu).
Select a menu from the main menu by pressing the Point Up
/ Down button, and press the Point Right button to enter the
sub-menu. (The selected icon turns yellow.)
Press the MENU button to close the On-Screen Menu when
you are in the main menu. When you are in the sub-menu,
press the MENU button once to return to the main menu or
hold the MENU button for more than 2 seconds to close the
On-Screen Menu.
Select an item by pressing the Point Up / Down button, and
activate the item that you have selected with the
(SELECT), (Point
Left), or (Point Right) button.
1
2
4
3
You can control and adjust this LCD Projection Monitor through
the On-Screen Menu. Refer to the following pages to operate
each adjustment on the On-Screen Menu.
LAMP
REPLACE WARNING
INPUT
MENU SELECT d e
+
7 8
VOLUME
Front Panel
Item
LL
LAMP
MENU SCREEN
SELECT
LAMP
CONTROL AUTO PC
FREEZE FREEZE
+
Remote Control
On-Screen Menu
On-Screen Menu (Main Menu)
NOTE:
●
If you are selecting a sub-menu or an item displayed in a line, pressing the MENU
button takes you back to the previous On-Screen Menu.
●
The On-Screen Menu disappears by holding down the MENU button for a while
whatever you are selecting.
On-Screen Menu (Sub-Menu)
Point buttons
SELECT button
MENU button
Basic Oper
ation
SELECT button
Point buttons
MENU button
Point
Right
button