Sony UP-DR100 User Manual
Page 17
O
per
at
ion
Adjusting Gray Balance
17
4
Look at the printout of Group A to determine the
best gray balance from this group.
5
Next, look at the printout of Group B to determine
the best gray balance from this group, too.
6
Press the CALIBRATION button.
The ONLINE indicator goes off and the printer is
switched to off-line.
7
Press the
F and f buttons to select GRAY ADJUST
[A].
The printer enters the gray balance adjustment
mode.
8
Press the
G and g buttons to display the pattern
number determined in step 4.
For example, select 18 if you determined that
pattern No. 18 in the sample provides the best gray
balance.
9
Press the
F and f buttons to select GRAY ADJUST
[B].
The printer enters the gray balance adjustment
mode.
10
Press the
G and g buttons to display the pattern
number determined in step 5.
For example, select 39 if you determined that
pattern No. 39 in the sample provides the best gray
balance.
11
Press the CALIBRATION button.
The printer returns to the on-line mode, and the
ONLINE indicator lights.
Press
F
and
f
to display GRAY
ADJUST [A].
Press
G
and
g
to display 18.
Press
F
and
f
to display GRAY
ADJUST [B].
Press
G
and
g
to display 39.