Sony UP-DR100 - Manual (Page 19)

O
per
at
ion
Displaying the Firmware Version of the Printer
19
To display the remaining amount of the ink
ribbon:
Select “RIBBON REMAIN.”
To display the remaining amount of paper:
Select “PAPER REMAIN”.
3
Press the MENU button after confirming.
The printer returns to the on-line mode, and the
ONLINE indicator lights.
Note
If the ink ribbon and paper have not been used from
the beginning, the remaining amount displayed
may be incorrect.
Displaying the Firmware
Version of the Printer
The version of the firmware of the printer can be
displayed.
1
Press the MENU button.
The ONLINE indicator goes off and the printer is
switched to off-line.
2
Press the F and f buttons to display VERSION.
3
Press the MENU button after confirming.
The printer returns to the on-line mode, and the
ONLINE indicator lights.
Press F and f to display
RIBBON REMAIN.
Remaining amount of the
ink ribbon Type of the ink ribbon
Press F and f to display
PAPER REMAIN.
Remaining amount of paper Type of the paper
Access the following site to get the latest information on
the printer.
http://www.sony.co.jp/DP-driver-E/
1,3 2
ONLINE indicator
Press F and f to display VERSION.
Version of the firmware of the printer