SMC Networks TigerCard 1000 - Manual (Page 32)

2-13
I
NSTALLING
N
ETWORK
D
RIVERS
Windows 98 Installation
The TigerCard 1000 driver for Windows 98 conforms to the
Network Driver Interface Specification (NDIS) 5.0 and can be
found in the “\Win98” directory on the SMC SuperDisk driver
diskette.
Note: For users of Windows 95 and Windows 95 OSR2 there is
an NDIS 3.1 driver provided on the SMC SuperDisk in the
“\Win95” directory. The installation procedure for
Windows 95 is slightly different than that described here.
Refer to the “Win95.txt” driver installation document on
the SMC SuperDisk for more information.
1. If Windows 98 is already installed on your computer, proceed
to Step 2. Otherwise, complete a first-time Windows 98
installation without the SMC network card installed.
2. Shut down your PC, install the SMC network card, and attach
network cable.
3. Power on your PC and boot into Windows 98.
4. When Windows 98 prompts with “PCI Ethernet Controller” in
the “New Hardware Found” dialog box, click the “Next”
button.
5. Select “Search for the best driver for your device
(Recommended)” from the “Add New Hardware Wizard”
dialog box, then click the “Next” button.
6. Insert the SMC9462SX Driver Diskette in your floppy drive.
7. Select “Specify a location” and type path “A:\Win98” in the
“Add New Hardware Wizard” dialog box, then click the “Next”
button.
8. Click the “Next” button in the “Add New Hardware Wizard”
dialog box.