Sony RM-AV2000T - Manual (Page 30)

29 EN
3
Press the SYSTEM CONTROL
button you want to teach.
“LEARN” flashes and the display for
the pressed SYSTEM CONTROL
button stays lit.
4
Press and hold down the button
of the remote control of the
air-conditioner until you hear a
beep.
“LEARN” display stops flashing and
stays lit.
If you hear beeps and “NG”
flashes on the display
Learning did not succeed. Try Steps 3 and
4 again.
5
Press COMMANDER OFF.
To clear the learned remote
control signal
1 While pressing COMMANDER OFF,
press PROGRAM + and Á +.
2 While pressing the RESET key, press
SYSTEM CONTROL 1, 2, or 3.
SYSTEM CONTROL
2
SC2
LEARN NG
AIR CONDITIONER
ON/OFF
COMMANDER
OFF