Sharp VIEWCAMZ VL-Z5E - Manual (Page 47)

Useful Features
37
Quick Return
Available mode:
Tape Camera
If while playing back your tape you want to
quickly return to the last recorded scene
and start recording again, use the quick
return function.
1
Set the camcorder to Tape Camera
mode.
2
In Recording Standby mode, press
the DISPLAY button until the mode
screen appears.
3
Press l or m on the Operation
button to select “MENU”, then press
the centre of the Operation button.
4
Press l or m to select “EXECUTE”,
then press the centre of the Operation
button.
5
Press l or m to select T, then
press the centre of the Operation
button.
6
Press l or m to select “QK.
RETURN”, then press the centre of
the Operation button.
7
Press l or m to select “START”,
then press the centre of the Operation
button.
• “SEARCH” flashes, and the tape
begins fast forwarding or rewinding
to the end of the last recorded scene.
• When the tape reaches the end of
the last recorded scene, “FINISHED”
is displayed, and the camcorder
enters Recording Standby mode.
8
Press the DISPLAY button to turn off
the menu screen.
Notes:
• To cancel the quick return function while
“SEARCH” is flashing, press the centre of
Operation button twice.
• Quick return will not work if you remove the
cassette and reload it after recording or if
nothing has been recorded since loading.
S E T T I N G 1
Q K .
D G T L
R E T U R N
Z O OM
T A P E S P E E D
R E T U R N S T A R T
S T O P
S E A R C H