Sharp VIEWCAMZ VL-Z5E - Manual (Page 56)

Useful Features
Playback
Useful Features
46
Using the Remote
Control (Only
supplied with VL-Z5)
Available modes:
All modes
Use the remote control to operate the
camcorder from a distance, such as when
you want to record yourself in a scene, or
when the camcorder is connected to a TV
for use as a VCR.
Activating
• The example screens shown are for Tape
Playback mode.
1
Press the DISPLAY button until the
mode screen appears.
2
Press l or m on the Operation
button to select “MENU”, then press
the centre of the Operation button.
3
Press l or m to select “EXECUTE”,
then press the centre of the Operation
button.
4
Press l or m to select Z, then
press the centre of the Operation
button.
5
Press l or m to select “REMOTE”,
then press the centre of the Operation
button.
6
Press l or m to select “ON”, then
press the centre of the Operation
button.
7
Press the DISPLAY button to turn off
the menu screen.
Useful Features
Playback
Operating
Aim the remote control at the remote sensor
of the camcorder, and press the control
buttons to operate.
Notes:
• Be careful not to expose the remote sensor to
direct sunlight or strong interior lighting, as
this may prevent the remote control from
operating properly.
• Be sure that there are no obstacles between
the remote control and the remote sensor.
• The remote control (RRMCGA149WJSA) is
not supplied with VL-Z3. Contact the nearest
SHARP service center or your dealer for
purchasing as specified part.
O T H E R S 1
B E E P
R EMO T E
D E F A U L T
R E T U RN
O N
O F F
REMO T E ON
ZOOM (W/T) buttons
SLOW button
Remote sensor
5 m
CARD PLAY/MULTI button
Advance/reverse buttons
Shift buttons
VOLUME +/L buttons
PLAY button
STOP button
PAUSE/STILL
button
REW button
FF button
DATE button
T/C (Time
Code) button
CARD REC button
TAPE REC START/STOP button